- Power Mac G4 Diagram
- Power Mac G4 User Manual Software
- Power Mac G4 User Manual 2016
- Power Mac G4 User Manual Instructions
The Power Mac G4 is a series of personal computers designed, manufactured, and sold by Apple Computer, Inc. From 1999 to 2004 as part of the Power Macintosh line. Built around the PowerPC G4 series of microprocessors, the Power Mac G4 was marketed by Apple as the first 'personal supercomputers', reaching speeds of 4 to 20 gigaFLOPS.This was the first existing Macintosh product to be officially. Here you can view all the pages of manual Apple power mac g4 cube User Manual. The Apple manuals for Personal Computer are available online for free.
- #26.10.2014502.8 Kb4Airport Card Replacement Instructions.pdf
- #26.10.2014202.13 Kb4Ata Drive Cable Replacement Instructions.pdf
- #26.10.2014381.53 Kb4Ata Hard Drive Replacement Instructions.pdf
- #26.10.2014179.15 Kb4Cd-Dvd Drive Replacement Instructions.pdf
- #26.10.2014377.73 Kb4Memory Dram Dimm Replacement Instructions.pdf
- #26.10.2014263.32 Kb4Modem Replacement Instructions.pdf
- #26.10.2014202.2 Kb4Optical Drive Replacement Instructions.pdf
- #26.10.2014424.76 Kb4Power Supply Replacement Instructions.pdf
Power Mac G4 / Macintosh Server G4
AirPort Card
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your equipment and may void your warranty.
Note: Written and video instructions covering
Tools Required
No tools are required for this procedure.
Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its internal components.
1.Place your computer on a clean, flat surface.
2.If you think your computer is in sleep, press the power button on the front of the computer to wake it.
3.Shut down your computer by opening the Special menu and choosing Shut Down. Then wait five minutes for the computer’s internal components to cool down.
4.If you attached a security cable through the computer’s lockable cover latch, remove the cable.
5.Unplug all other cables from the computer except the power cord.
6.Touch the metal PCI access covers on the back of the computer. (Figure 1A)
Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer.
7.Unplug the power cord.
8.Lift the latch on the right side access panel. (Figure 1B)
9.Gently lower the access panel until it lies flat. To avoid scratching the case, lower the panel onto a soft, clean cloth. (Figure 2)
Warning: If you see any lights glowing on the main logic board, the computer has not been shut down. Close the side access panel and shut down the computer before proceeding.
Removing the Installed Card
1.Unplug the antenna wire from the port in the end of the AirPort Card. (Figure 3A)
2.Gently pull the end of the card until you feel it release from the card connector.
(Figure 3B)
3.Remove the card from the card guide and the computer.
Installing the Replacement Card
1.Insert the AirPort Card through the opening in the card guide and into the AirPort Card connector on the logic board. Make sure the card is firmly seated in the connector.
(Figure 4A)
Warning: Do not insert any card other than an AirPort Card into this connector or you could damage your computer and the card.
2.Attach the antenna wire to the port on the end of the AirPort Card. (Figure 4B)
Closing the Computer
1.Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place.
2.Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury.
Apple Computer, Inc.
© 2001 Apple Computer, Inc. All rights reserved.
Power Mac G4 Diagram
Under the copyright laws, this document may not be copied, in whole or in part, without the written consent of Apple.
Power Mac G4 User Manual Software
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo
Every effort has been made to ensure that the information in this document is accurate. Apple is not responsible for printing or clerical errors.
Apple Computer, Inc. 1 Infinite Loop
Cupertino, CA
+ 1 408 996 1010 http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
AirPort and Power Mac are trademarks of Apple Computer, Inc.
Power Mac G4 AirPort Card - 4
Power Mac G4 User Manual 2016
Power Mac G4 AirPort Card - 5
Power Mac G4 User Manual Instructions
Power Mac G4 AirPort Card - 6